iot-contact/pcb/iot-contact.kicad_pcb, branch mdnsIoT device to check if doors and windows are closed or openhttps://cgit.xengineering.eu/iot-contact/atom?h=mdns2025-07-22T16:18:24Zpcb: Draw Edge.Cuts outline2025-07-22T16:18:24Zxengineeringme@xengineering.eu2025-07-22T16:14:07Zurn:sha1:3f9ddc64a771f44ef32a72e58ef1c98c65b54d4dpcb: Update to KiCad 9.x2025-04-01T16:13:10Zxengineeringme@xengineering.eu2025-04-01T16:13:10Zurn:sha1:aa3a6384f14ee7d148b84523aa30723bc1020d39pcb: Add empty KiCad project2025-02-14T12:41:27Zxengineeringme@xengineering.eu2025-02-03T16:52:52Zurn:sha1:789b0e234ef38c812120ed405d3fd344c7c1d6c7
This is the starting point for the PCB development.
pcb: Remove folder2024-08-23T14:58:30Zxengineeringme@xengineering.eu2024-08-23T14:58:30Zurn:sha1:0db3f05ade565c23bc1654b5a88af4a06c71e17e
It is planned to switch to Ethernet instead of LoRa for communication.
Thus the custom PCB with the STM32WL MCU does not make sense anymore. To
get started the Ethernet variant will use a ST NUCLEO board to avoid
creating a custom PCB first.
pcb: Add outline to PCB2024-06-03T19:23:05Zxengineeringme@xengineering.eu2024-06-03T19:23:05Zurn:sha1:69d66f534ca25bce98ee1984325149891f27f76c
This makes the KiCad project a valid PCB as a minimal starting point.
pcb: Place MCU in PCB editor2024-06-03T19:10:40Zxengineeringme@xengineering.eu2024-06-03T19:10:40Zurn:sha1:618ba4fa7b6da3695dca35a49b2b3beb5c695a53pcb: Create empty KiCad 8.0 project2024-06-03T18:45:41Zxengineeringme@xengineering.eu2024-06-03T18:45:21Zurn:sha1:6053827028a6590196baea8a3928fa10c1f2ddc6