diff options
| author | xengineering <me@xengineering.eu> | 2025-03-21 22:47:17 +0100 |
|---|---|---|
| committer | xengineering <me@xengineering.eu> | 2025-03-21 22:47:17 +0100 |
| commit | fb24214660b60e97cc3b012fb0ac31d5a54e9e9e (patch) | |
| tree | 16fc1d9d95bab4ca499e385362b1340faa3a3e19 | |
| parent | 3d28070910e3cf6ec5375e18cafbda0b7b22cfc8 (diff) | |
| download | iot-contact-fb24214660b60e97cc3b012fb0ac31d5a54e9e9e.tar iot-contact-fb24214660b60e97cc3b012fb0ac31d5a54e9e9e.tar.zst iot-contact-fb24214660b60e97cc3b012fb0ac31d5a54e9e9e.zip | |
fw: nucleo: Allow custom my.conf configuration
This allows to set custom IPv6 addresses while there is not runtime
configuration.
| -rw-r--r-- | fw/.gitignore | 1 | ||||
| -rwxr-xr-x | fw/nucleo.sh | 9 |
2 files changed, 9 insertions, 1 deletions
diff --git a/fw/.gitignore b/fw/.gitignore new file mode 100644 index 0000000..b6b51e9 --- /dev/null +++ b/fw/.gitignore @@ -0,0 +1 @@ +my.conf diff --git a/fw/nucleo.sh b/fw/nucleo.sh index 8bff4a0..24966b1 100755 --- a/fw/nucleo.sh +++ b/fw/nucleo.sh @@ -28,12 +28,19 @@ FLASH_ADDRESS='0x8000000' BOARD='nucleo_f767zi' BAUDRATE='115200' SERIAL_PORT='/dev/ttyACM0' +CONFIG_OVERLAY="${FW}/my.conf" +overlay_config='' +if test -f "$CONFIG_OVERLAY" +then + overlay_config="-DEXTRA_CONF_FILE="${CONFIG_OVERLAY}"" +fi + set -x rm -rf "$BUILD" -cmake "-B${BUILD}" -GNinja -DBOARD="$BOARD" +cmake "-B${BUILD}" -GNinja -DBOARD="$BOARD" "$overlay_config" ninja -C "$BUILD" st-flash --connect-under-reset write "$FIRMWARE" "$FLASH_ADDRESS" picocom -b "$BAUDRATE" "$SERIAL_PORT" |