WIP: Move `mech` directory to `case`

TODO: There are outdated references (see grep -R mech .)

The directory name should reflect what is inside, not the field of
engineering it belongs to.

1 files changed, 0 insertions, 331 deletions

diff --git a/mech/prusa-slicer/anycubic_i3_mega_s.ini b/mech/prusa-slicer/anycubic_i3_mega_s.ini
deleted file mode 100644
index 10abab4..0000000
--- a/mech/prusa-slicer/anycubic_i3_mega_s.ini
+++ /dev/null
@@ -1,331 +0,0 @@
-# generated by PrusaSlicer 2.7.1 on 2023-12-23 at 18:21:27 UTC
-arc_fitting = disabled
-autoemit_temperature_commands = 1
-avoid_crossing_curled_overhangs = 0
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,210x0,210x210,0x210
-bed_temperature = 60
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]
-between_objects_gcode = 
-binary_gcode = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 5
-bottom_solid_min_thickness = 0.5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-color_change_gcode = M600
-colorprint_heights = 
-compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/  and nozzle_diameter[0]==0.4";"printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/"
-complete_objects = 0
-cooling = 1
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_acceleration = 1000
-default_filament_profile = "Generic PLA @MEGA"
-default_print_profile = 0.15mm QUALITY @MEGA
-deretract_speed = 50
-disable_fan_first_layers = 1
-dont_support_bridges = 1
-draft_shield = disabled
-duplicate_distance = 6
-elefant_foot_compensation = 0
-enable_dynamic_fan_speeds = 0
-enable_dynamic_overhang_speeds = 0
-end_filament_gcode = "; Filament-specific end gcode"
-end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors
-external_perimeter_acceleration = 0
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_loading_move = -2
-extra_perimeters = 1
-extra_perimeters_on_overhangs = 0
-extruder_clearance_height = 35
-extruder_clearance_radius = 60
-extruder_colour = #808080
-extruder_offset = 0x0
-extrusion_axis = E
-extrusion_multiplier = 1
-extrusion_width = 0.45
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 25.4
-filament_density = 1.24
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 10
-filament_minimal_purge_on_wipe_tower = 15
-filament_multitool_ramming = 0
-filament_multitool_ramming_flow = 10
-filament_multitool_ramming_volume = 10
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_length_toolchange = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_restart_extra_toolchange = nil
-filament_retract_speed = nil
-filament_settings_id = "Generic PLA @MEGA"
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_travel_lift_before_obstacle = nil
-filament_travel_max_lift = nil
-filament_travel_ramping_lift = nil
-filament_travel_slope = nil
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = Generic
-filament_wipe = nil
-fill_angle = 45
-fill_density = 15%
-fill_pattern = gyroid
-first_layer_acceleration = 800
-first_layer_acceleration_over_raft = 0
-first_layer_bed_temperature = 65
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 20
-first_layer_speed_over_raft = 30
-first_layer_temperature = 215
-full_fan_speed_layer = 0
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_flavor = marlin
-gcode_label_objects = octoprint
-gcode_resolution = 0.0125
-gcode_substitutions = 
-high_current_on_filament_swap = 0
-host_type = prusalink
-idle_temperature = nil
-infill_acceleration = 1000
-infill_anchor = 2.5
-infill_anchor_max = 12
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-layer_height = 0.15
-machine_limits_usage = time_estimate_only
-machine_max_acceleration_e = 10000
-machine_max_acceleration_extruding = 1250
-machine_max_acceleration_retracting = 1250
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 3000
-machine_max_acceleration_y = 2000
-machine_max_acceleration_z = 60
-machine_max_feedrate_e = 30
-machine_max_feedrate_x = 500
-machine_max_feedrate_y = 500
-machine_max_feedrate_z = 8
-machine_max_jerk_e = 5
-machine_max_jerk_x = 10
-machine_max_jerk_y = 10
-machine_max_jerk_z = 0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_fan_speed = 100
-max_layer_height = 0.36
-max_print_height = 205
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_bead_width = 85%
-min_fan_speed = 100
-min_feature_size = 25%
-min_layer_height = 0.07
-min_print_speed = 15
-min_skirt_length = 4
-mmu_segmented_region_interlocking_depth = 0
-mmu_segmented_region_max_width = 0
-notes = 
-nozzle_diameter = 0.4
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhang_fan_speed_0 = 0
-overhang_fan_speed_1 = 0
-overhang_fan_speed_2 = 0
-overhang_fan_speed_3 = 0
-overhang_speed_0 = 15
-overhang_speed_1 = 15
-overhang_speed_2 = 20
-overhang_speed_3 = 25
-overhangs = 1
-parking_pos_retraction = 92
-pause_print_gcode = M601
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_generator = arachne
-perimeter_speed = 50
-perimeters = 2
-physical_printer_settings_id = 
-post_process = 
-print_host = 
-print_settings_id = 0.15mm QUALITY @MEGA
-printer_model = I3MEGAS
-printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN
-printer_settings_id = Anycubic i3 Mega S
-printer_technology = FFF
-printer_variant = 0.4
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-remaining_times = 1
-resolution = 0
-retract_before_travel = 1.5
-retract_before_wipe = 60%
-retract_layer_change = 1
-retract_length = 6
-retract_length_toolchange = 10
-retract_lift = 0.075
-retract_lift_above = 0
-retract_lift_below = 204
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-seam_position = nearest
-silent_mode = 0
-single_extruder_multi_material = 0
-single_extruder_multi_material_priming = 1
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-slice_closing_radius = 0.049
-slicing_mode = regular
-slowdown_below_layer_time = 20
-small_perimeter_speed = 25
-solid_infill_acceleration = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-staggered_inner_seams = 0
-standby_temperature_delta = -5
-start_filament_gcode = "; Filament gcode\n"
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.1
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 50
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-support_tree_angle = 40
-support_tree_angle_slow = 25
-support_tree_branch_diameter = 2
-support_tree_branch_diameter_angle = 5
-support_tree_branch_diameter_double_wall = 3
-support_tree_branch_distance = 1
-support_tree_tip_diameter = 0.8
-support_tree_top_rate = 15%
-temperature = 210
-template_custom_gcode = 
-thick_bridges = 1
-thin_walls = 0
-thumbnails = 16x16,220x124
-thumbnails_format = PNG
-toolchange_gcode = 
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_acceleration = 0
-top_solid_infill_speed = 40
-top_solid_layers = 7
-top_solid_min_thickness = 0.7
-travel_acceleration = 0
-travel_lift_before_obstacle = 0
-travel_max_lift = 0
-travel_ramping_lift = 0
-travel_slope = 0
-travel_speed = 180
-travel_speed_z = 0
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe = 1
-wipe_into_infill = 0
-wipe_into_objects = 0
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_cone_angle = 0
-wipe_tower_extra_spacing = 100%
-wipe_tower_extruder = 0
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-wiping_volumes_extruders = 70,70
-wiping_volumes_matrix = 0
-xy_size_compensation = 0
-z_offset = 0