WIP: Move `mech` directory to `case`

TODO: There are outdated references (see grep -R mech .)

The directory name should reflect what is inside, not the field of
engineering it belongs to.

15 files changed, 0 insertions, 789 deletions

diff --git a/mech/assembly.scad b/mech/assembly.scad
deleted file mode 100644
index 756e539..0000000
--- a/mech/assembly.scad
+++ /dev/null
@@ -1,18 +0,0 @@
-include <parameters.scad>
-
-use <panel_front.scad>
-
-use <pcb_case/pcb.scad>
-use <pcb_case/shell.scad>
-use <pcb_case/panel.scad>
-
-module assembly() {
-	pcb(pcb_dim, drillings, margins, t);
-
-	pcb_case_shell_bottom(pcb_dim, drillings, margins, t);
-	pcb_case_shell_top(pcb_dim, margins, t);
-	pcb_case_panel_back(pcb_dim, margins, t);
-	panel_front(pcb_dim, margins, t);
-}
-
-assembly();
diff --git a/mech/mech.mk b/mech/mech.mk
deleted file mode 100644
index ca39a7c..0000000
--- a/mech/mech.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-PRINTER := anycubic_i3_mega_s
-PRINTER_CONFIG := $(PRINTER:%=mech/prusa-slicer/%.ini)
-MECH_BUILD_DIR := $(BUILD_DIR)/mech
-PARTS := assembly production pcb_case/tolerance_tests
-STL := $(PARTS:%=$(MECH_BUILD_DIR)/%.stl)
-GCODE := $(PARTS:%=$(MECH_BUILD_DIR)/%.gcode)
-
-.PHONY: mech
-mech: $(GCODE) $(STL)
-
-$(BUILD_DIR)/%.gcode: $(BUILD_DIR)/%.stl
-	mkdir -p $(dir $@)
-	prusa-slicer --load $(PRINTER_CONFIG) --output $@ --export-gcode $<
-
-$(BUILD_DIR)/%.stl: %.scad
-	mkdir -p $(dir $@)
-	openscad --hardwarnings --export-format binstl -o $@ $<
diff --git a/mech/panel_front.scad b/mech/panel_front.scad
deleted file mode 100644
index da06927..0000000
--- a/mech/panel_front.scad
+++ /dev/null
@@ -1,70 +0,0 @@
-use <pcb_case/conversion.scad>
-use <pcb_case/panel.scad>
-
-tol = 2;
-
-module panel_front(pcb_dim, margins, t) {
-	dim = dim_pcb_to_case(pcb_dim, margins, t);
-	x_off = dim[0]-2*t;
-
-	difference() {
-		pcb_case_panel_front(pcb_dim, margins, t);
-		mini_hdmi_hole(pcb_dim, margins, t);
-		for(v=[
-		    [usb_max_y-usb_max_delta_y-tol/2, 0.75*t],
-		    [usb_max_y-usb_delta_y-tol/2, t]
-		]) {
-			translate([0, v[0], 0]) {
-				micro_usb_hole(pcb_dim, margins, t, v[1]);
-			}
-		}
-		for(y = [cinch_min_y+0.5*cinch_d, cinch_min_y+1.5*cinch_d+cinch_delta_y]) {
-			translate([0, y, 0]) {
-				cinch_hole(pcb_dim, margins, t);
-			}
-		}
-	}
-}
-
-hdmi_delta_y = 11.8;
-hdmi_delta_z = 3.9;
-hdmi_max_y = 31.7;
-hdmi_max_z = 13.7;
-module mini_hdmi_hole(pcb_dim, margins, t) {
-	case_dim = dim_pcb_to_case(pcb_dim, margins, t);
-	translate([
-	    case_dim[0]-2*t,
-	    hdmi_max_y-hdmi_delta_y-tol/2,
-	    hdmi_max_z-hdmi_delta_z-tol/2]) {
-		cube([t, hdmi_delta_y+tol, hdmi_delta_z+tol]);
-	}
-}
-
-usb_delta_y = 8;
-usb_max_delta_y = 20.6;
-usb_delta_z = 3;
-usb_max_y = 71.55;
-usb_max_z = 12.7;
-module micro_usb_hole(pcb_dim, margins, t, dx) {
-	echo(dx);
-	case_dim = dim_pcb_to_case(pcb_dim, margins, t);
-	translate([
-	    case_dim[0]-2*t,
-	    0,
-	    usb_max_z-usb_delta_z-tol/2]) {
-		cube([dx, usb_delta_y+tol, usb_delta_z+tol]);
-	}
-}
-
-cinch_d = 8.3;
-cinch_min_y = 45;
-cinch_delta_y = 8.2;
-cinch_max_z = 34.25;
-module cinch_hole(pcb_dim, margins, t) {
-	case_dim = dim_pcb_to_case(pcb_dim, margins, t);
-	translate([case_dim[0]-2*t, 0, cinch_max_z-cinch_d/2]) {
-		rotate([0, 90, 0]) {
-			cylinder(d=cinch_d+tol, h=t, $fn=30);
-		}
-	}
-}
diff --git a/mech/parameters.scad b/mech/parameters.scad
deleted file mode 100644
index 9fda8b4..0000000
--- a/mech/parameters.scad
+++ /dev/null
@@ -1,21 +0,0 @@
-include <pcb_case/bolt.scad>
-
-t = 1.65;
-
-pcb_dim = [30, 65, 1.4];
-
-margins = [
-	[1, 0.3],
-	[3.6, 1.7],
-	[bolt_l-t-pcb_dim[2], 27]
-];
-
-base_drilling = [3.5, 3.5];
-dx = [23, 0];
-dy = [0, 58];
-drillings = [
-	base_drilling,
-	base_drilling + dx,
-	base_drilling + dy,
-	base_drilling + dx + dy
-];
diff --git a/mech/pcb_case/bolt.scad b/mech/pcb_case/bolt.scad
deleted file mode 100644
index 4c26c30..0000000
--- a/mech/pcb_case/bolt.scad
+++ /dev/null
@@ -1,13 +0,0 @@
-// bolt based on ISO 4762 (https://www.fasteners.eu/us/standards/ISO/4762)
-bolt_k = 3;
-bolt_l = 10;
-bolt_dk = 5.5;
-bolt_ds = 3;
-bolt_ds_tol = 0.45;
-
-module bolt() {
-	union() {
-		cylinder(d=bolt_ds, h=bolt_l, $fn=30);
-		translate([0, 0, -bolt_ds]) cylinder(d=bolt_dk, h=bolt_ds, $fn=30);
-	}
-}
diff --git a/mech/pcb_case/conversion.scad b/mech/pcb_case/conversion.scad
deleted file mode 100644
index 69c3c3b..0000000
--- a/mech/pcb_case/conversion.scad
+++ /dev/null
@@ -1,8 +0,0 @@
-include <bolt.scad>
-include <nut.scad>
-
-function dim_pcb_to_case(pcb_dim, margins, t) = [
-	pcb_dim[0]+margins[0][0]+margins[0][1]+4*t,
-	pcb_dim[1]+margins[1][0]+margins[1][1]+2*t+2*(bolt_l-t),
-	pcb_dim[2]+margins[2][0]+margins[2][1]+4*t
-];
diff --git a/mech/pcb_case/nut.scad b/mech/pcb_case/nut.scad
deleted file mode 100644
index 0768b6a..0000000
--- a/mech/pcb_case/nut.scad
+++ /dev/null
@@ -1,7 +0,0 @@
-nut_h = 3;
-nut_d = 4.15;
-nut_d_tol = 0.2;
-
-module nut() {
-	cylinder(d=nut_d,h=nut_h);
-}
diff --git a/mech/pcb_case/panel.scad b/mech/pcb_case/panel.scad
deleted file mode 100644
index eef0b28..0000000
--- a/mech/pcb_case/panel.scad
+++ /dev/null
@@ -1,28 +0,0 @@
-include <nut.scad>
-
-use <conversion.scad>
-use <rounded_cube.scad>
-
-panel_dim_0_tol = 0.3;
-panel_dim_1_2_tol = 0.45;
-
-module pcb_case_panel(pcb_dim, margins, t) {
-	dim = dim_pcb_to_case(pcb_dim, margins, t);
-
-	rounded_cube(
-		dim=[t, dim[1]-2*t, dim[2]-2*t],
-		radius=t
-	);
-}
-
-module pcb_case_panel_back(pcb_dim, margins, t) {
-	translate([t, t, t])
-		pcb_case_panel(pcb_dim, margins, t);
-}
-
-module pcb_case_panel_front(pcb_dim, margins, t) {
-	dim = dim_pcb_to_case(pcb_dim, margins, t);
-
-	translate([dim[0]-2*t, t, t])
-		pcb_case_panel(pcb_dim, margins, t);
-}
diff --git a/mech/pcb_case/pcb.scad b/mech/pcb_case/pcb.scad
deleted file mode 100644
index 7b24131..0000000
--- a/mech/pcb_case/pcb.scad
+++ /dev/null
@@ -1,14 +0,0 @@
-include <bolt.scad>
-include <nut.scad>
-
-module pcb(dim, drillings, margins, t) {
-	translate([2*t+margins[0][0], bolt_l+margins[1][0], t+margins[2][0]]) {
-		difference() {
-			cube([dim[0], dim[1], dim[2]]);
-			for (drilling = drillings) {
-				translate([drilling[0], drilling[1], 0])
-					cylinder(d=3, h=dim[2], $fn=30);
-			}
-		}
-	}
-}
diff --git a/mech/pcb_case/rounded_cube.scad b/mech/pcb_case/rounded_cube.scad
deleted file mode 100644
index acd50e7..0000000
--- a/mech/pcb_case/rounded_cube.scad
+++ /dev/null
@@ -1,12 +0,0 @@
-module rounded_cube(dim, radius) {
-	range_y = [radius, dim[1]-radius];
-	range_z = [radius, dim[2]-radius];
-	height = dim[0];
-
-	hull() {
-		for (y=range_y, z=range_z) {
-			translate([0,y,z]) rotate([0,90,0])
-				cylinder(r=radius, h=height, $fn=30);
-		}
-	}
-}
diff --git a/mech/pcb_case/shell.scad b/mech/pcb_case/shell.scad
deleted file mode 100644
index 18139f6..0000000
--- a/mech/pcb_case/shell.scad
+++ /dev/null
@@ -1,116 +0,0 @@
-include <bolt.scad>
-include <nut.scad>
-include <panel.scad>
-
-use <conversion.scad>
-use <rounded_cube.scad>
-
-module shell_base(pcb_dim, margins, t) {
-	dim = dim_pcb_to_case(pcb_dim, margins, t);
-
-	difference() {
-		// full body
-		rounded_cube(dim=dim, radius=t);
-
-		// cut away upper half
-		translate([0,0,dim[2]/2])
-			cube([dim[0], dim[1], dim[2]/2]);
-
-		// main PCB space
-		translate([3*t, t, t])
-			rounded_cube([dim[0]-6*t, dim[1]-2*t, dim[2]-2*t], t);
-
-		// remove front and back
-		translate([0, 2*t, 2*t])
-			rounded_cube([dim[0], dim[1]-4*t, dim[2]-4*t], t);
-
-		// panel holder
-		for (x_off = [t-panel_dim_0_tol/2, dim[0]-2*t-panel_dim_0_tol/2]) {
-			translate([x_off, t-panel_dim_0_tol/2, t-panel_dim_0_tol/2]) {
-				rounded_cube(
-					[
-						t+panel_dim_0_tol,
-						dim[1]-2*t+panel_dim_1_2_tol,
-						dim[2]-2*t+panel_dim_1_2_tol
-					],
-					t
-				);
-			}
-		}
-
-		// bolt drillings
-		for (x = [dim[0]/4, dim[0]-dim[0]/4]) {
-			translate([x,0,dim[2]/2-1.5*bolt_ds])
-				rotate([-90,0,0])
-					cylinder(d=bolt_ds+bolt_ds_tol, h=1.1*t, $fn=30);
-		}
-	}
-}
-
-module shell_connector(pcb_dim, margins, t) {
-	dim = dim_pcb_to_case(pcb_dim, margins, t);
-
-	size_x = dim[0]-6*t;
-	size_y = bolt_l-t;
-	size_z = dim[2]/2+3*bolt_ds;
-
-	difference () {
-		// base body
-		translate([3*t,dim[1]-t-size_y,0])
-			cube([size_x,size_y,size_z]);
-
-		// bolt holes
-		for (x = [dim[0]/4, dim[0]-dim[0]/4]) {
-			translate([x,dim[1]-t,dim[2]/2+1.5*bolt_ds])
-				rotate([90,0,0])
-					cylinder(d=bolt_ds+bolt_ds_tol, h=size_y, $fn=30);
-		}
-
-		// nut holes
-		for (x = [dim[0]/4, dim[0]-dim[0]/4]) {
-			translate([x, dim[1]-t-size_y, dim[2]/2+1.5*bolt_ds])
-				rotate([-90,0,0])
-					cylinder(d=nut_d+nut_d_tol, h=nut_h, $fn=30);
-		}
-	}
-
-	echo(min_shell_bolt_length=t+size_y);
-}
-
-module pcb_case_shell(pcb_dim, drillings, margins, t) {
-	difference () {
-		union() {
-			shell_base(pcb_dim, margins, t);
-			shell_connector(pcb_dim, margins, t);
-			for (drilling = drillings) {
-				translate([
-					2*t+margins[0][0]+drilling[0],
-					bolt_l+margins[1][0]+drilling[1],
-					0
-				]) cylinder(d=nut_d+2, h=t+margins[2][0], $fn=30);
-			}
-		}
-		for (drilling = drillings) {
-			translate([
-				2*t+margins[0][0]+drilling[0],
-				bolt_l+margins[1][0]+drilling[1],
-				0
-			]) {
-				cylinder(d=bolt_ds+bolt_ds_tol, h=t+margins[2][0], $fn=30);
-				cylinder(d=nut_d+nut_d_tol, h=nut_h, $fn=30);
-			}
-		}
-	}
-}
-
-module pcb_case_shell_bottom(pcb_dim, drillings, margins, t) {
-	pcb_case_shell(pcb_dim, drillings, margins, t);
-}
-
-module pcb_case_shell_top(pcb_dim, margins, t) {
-	dim = dim_pcb_to_case(pcb_dim, margins, t);
-
-	translate([0, dim[1], dim[2]])
-		rotate([180,0,0])
-			pcb_case_shell(pcb_dim, [], margins, t);
-}
diff --git a/mech/pcb_case/spacer.scad b/mech/pcb_case/spacer.scad
deleted file mode 100644
index e7eba3a..0000000
--- a/mech/pcb_case/spacer.scad
+++ /dev/null
@@ -1,10 +0,0 @@
-include <bolt.scad>
-
-spacer_h = 11;
-
-module spacer() {
-	difference() {
-		cylinder(d=bolt_dk, h=spacer_h, $fn=30);
-		cylinder(d=bolt_ds+bolt_ds_tol, h=spacer_h, $fn=30);
-	}
-}
diff --git a/mech/pcb_case/tolerance_tests.scad b/mech/pcb_case/tolerance_tests.scad
deleted file mode 100644
index 94911cd..0000000
--- a/mech/pcb_case/tolerance_tests.scad
+++ /dev/null
@@ -1,86 +0,0 @@
-include <bolt.scad>
-include <nut.scad>
-include <panel.scad>
-
-use <rounded_cube.scad>
-
-t = 2;
-step_width = 0.15;
-
-module bolt_drilling() {
-	steps = 2;
-
-	for(i = [-steps : steps]) {
-		tol = bolt_ds_tol + i * step_width;
-		echo(bolt_ds_tol=tol);
-		translate([i*5*bolt_ds,0,0])
-			difference() {
-				cube([5*bolt_ds, 5*bolt_ds, t]);
-				translate([2.5*bolt_ds,2.5*bolt_ds,0]) {
-					cylinder(d=bolt_ds+tol,h=t,$fn=50);
-				}
-			}
-	}
-}
-
-module nut_drilling() {
-	steps = 2;
-
-	for(i = [-steps : steps]) {
-		tol = nut_d_tol + i * step_width;
-		echo(nut_d_tol=tol);
-		translate([i*5*nut_d,0,0])
-			difference() {
-				cube([5*nut_d, 5*nut_d, 2*nut_h]);
-				translate([2.5*nut_d,2.5*nut_d,0]) {
-					union() {
-						cylinder(d=bolt_ds+bolt_ds_tol,h=2*nut_h,$fn=50);
-						translate([0,0,nut_h])
-							cylinder(d=tol+nut_d,h=nut_h,$fn=50);
-					}
-				}
-			}
-	}
-}
-
-module panel_thickness() {
-	steps = 2;
-
-	height = 2*t;
-
-	for(i = [-steps : steps]) {
-		tol = panel_dim_0_tol + i * step_width;
-		echo(panel_dim_0_tol=tol);
-		translate([i*5*t,0,0])
-			difference() {
-				cube([5*t, 5*t, height]);
-				translate([2*t, 0, t]) {
-					cube([t+tol, 5*t, t]);
-				}
-			}
-	}
-}
-
-module panel_width_height() {
-	steps = 2;
-
-	height = 3*t;
-
-	for(i = [-steps : steps]) {
-		tol = panel_dim_1_2_tol + i * step_width;
-		echo(panel_dim_1_2_tol=tol);
-		translate([i*3*t,0,0])
-			difference() {
-				cube([3*t, 8*t, height]);
-				translate([t, t-tol/2, t]) {
-					rounded_cube([t+panel_dim_0_tol, 6*t+tol, 6*t+tol], t);
-				}
-			}
-	}
-}
-
-bolt_drilling();
-translate([0, 20, 0]) nut_drilling();
-translate([0, 70, 0]) panel_thickness();
-translate([0, 50, 0]) panel_width_height();
-translate([0, 85, 0]) rotate([0, -90, 0]) rounded_cube([t, 6*t, 6*t], t);
diff --git a/mech/production.scad b/mech/production.scad
deleted file mode 100644
index 5d04fbd..0000000
--- a/mech/production.scad
+++ /dev/null
@@ -1,38 +0,0 @@
-include <parameters.scad>
-
-use <panel_front.scad>
-
-use <pcb_case/conversion.scad>
-use <pcb_case/shell.scad>
-use <pcb_case/panel.scad>
-use <pcb_case/spacer.scad>
-
-module production() {
-	dim = dim_pcb_to_case(pcb_dim, margins, t);
-	spacing = 5;
-
-	pcb_case_shell_bottom(pcb_dim, drillings, margins, t);
-
-	translate([-spacing, 0, 0])
-		rotate([0, 180, 0])
-			translate([0, 0, -dim[2]])
-				pcb_case_shell_top(pcb_dim, margins, t);
-
-	translate([-spacing, dim[1]+spacing, 0])
-		rotate([0, -90, 0])
-			translate([-t, -t, -t])
-				pcb_case_panel_back(pcb_dim, margins, t);
-
-	translate([0, dim[1]+spacing, t])
-		rotate([0, 90, 0])
-			translate([2*t-dim[0], -t, -t])
-				panel_front(pcb_dim, margins, t);
-
-	for(i = [0:3]) {
-		translate([dim[0]+bolt_dk/2+spacing, bolt_dk/2+i*(bolt_dk+spacing), 0]) {
-			spacer();
-		}
-	}
-}
-
-production();
diff --git a/mech/prusa-slicer/anycubic_i3_mega_s.ini b/mech/prusa-slicer/anycubic_i3_mega_s.ini
deleted file mode 100644
index 10abab4..0000000
--- a/mech/prusa-slicer/anycubic_i3_mega_s.ini
+++ /dev/null
@@ -1,331 +0,0 @@
-# generated by PrusaSlicer 2.7.1 on 2023-12-23 at 18:21:27 UTC
-arc_fitting = disabled
-autoemit_temperature_commands = 1
-avoid_crossing_curled_overhangs = 0
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,210x0,210x210,0x210
-bed_temperature = 60
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]
-between_objects_gcode = 
-binary_gcode = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 5
-bottom_solid_min_thickness = 0.5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-color_change_gcode = M600
-colorprint_heights = 
-compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/  and nozzle_diameter[0]==0.4";"printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/"
-complete_objects = 0
-cooling = 1
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_acceleration = 1000
-default_filament_profile = "Generic PLA @MEGA"
-default_print_profile = 0.15mm QUALITY @MEGA
-deretract_speed = 50
-disable_fan_first_layers = 1
-dont_support_bridges = 1
-draft_shield = disabled
-duplicate_distance = 6
-elefant_foot_compensation = 0
-enable_dynamic_fan_speeds = 0
-enable_dynamic_overhang_speeds = 0
-end_filament_gcode = "; Filament-specific end gcode"
-end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors
-external_perimeter_acceleration = 0
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_loading_move = -2
-extra_perimeters = 1
-extra_perimeters_on_overhangs = 0
-extruder_clearance_height = 35
-extruder_clearance_radius = 60
-extruder_colour = #808080
-extruder_offset = 0x0
-extrusion_axis = E
-extrusion_multiplier = 1
-extrusion_width = 0.45
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 25.4
-filament_density = 1.24
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 10
-filament_minimal_purge_on_wipe_tower = 15
-filament_multitool_ramming = 0
-filament_multitool_ramming_flow = 10
-filament_multitool_ramming_volume = 10
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_length_toolchange = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_restart_extra_toolchange = nil
-filament_retract_speed = nil
-filament_settings_id = "Generic PLA @MEGA"
-filament_soluble = 0
-filament_spool_weight = 0
-filament_toolchange_delay = 0
-filament_travel_lift_before_obstacle = nil
-filament_travel_max_lift = nil
-filament_travel_ramping_lift = nil
-filament_travel_slope = nil
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = Generic
-filament_wipe = nil
-fill_angle = 45
-fill_density = 15%
-fill_pattern = gyroid
-first_layer_acceleration = 800
-first_layer_acceleration_over_raft = 0
-first_layer_bed_temperature = 65
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 20
-first_layer_speed_over_raft = 30
-first_layer_temperature = 215
-full_fan_speed_layer = 0
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 40
-gcode_comments = 0
-gcode_flavor = marlin
-gcode_label_objects = octoprint
-gcode_resolution = 0.0125
-gcode_substitutions = 
-high_current_on_filament_swap = 0
-host_type = prusalink
-idle_temperature = nil
-infill_acceleration = 1000
-infill_anchor = 2.5
-infill_anchor_max = 12
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-layer_height = 0.15
-machine_limits_usage = time_estimate_only
-machine_max_acceleration_e = 10000
-machine_max_acceleration_extruding = 1250
-machine_max_acceleration_retracting = 1250
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 3000
-machine_max_acceleration_y = 2000
-machine_max_acceleration_z = 60
-machine_max_feedrate_e = 30
-machine_max_feedrate_x = 500
-machine_max_feedrate_y = 500
-machine_max_feedrate_z = 8
-machine_max_jerk_e = 5
-machine_max_jerk_x = 10
-machine_max_jerk_y = 10
-machine_max_jerk_z = 0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_fan_speed = 100
-max_layer_height = 0.36
-max_print_height = 205
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_bead_width = 85%
-min_fan_speed = 100
-min_feature_size = 25%
-min_layer_height = 0.07
-min_print_speed = 15
-min_skirt_length = 4
-mmu_segmented_region_interlocking_depth = 0
-mmu_segmented_region_max_width = 0
-notes = 
-nozzle_diameter = 0.4
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhang_fan_speed_0 = 0
-overhang_fan_speed_1 = 0
-overhang_fan_speed_2 = 0
-overhang_fan_speed_3 = 0
-overhang_speed_0 = 15
-overhang_speed_1 = 15
-overhang_speed_2 = 20
-overhang_speed_3 = 25
-overhangs = 1
-parking_pos_retraction = 92
-pause_print_gcode = M601
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_generator = arachne
-perimeter_speed = 50
-perimeters = 2
-physical_printer_settings_id = 
-post_process = 
-print_host = 
-print_settings_id = 0.15mm QUALITY @MEGA
-printer_model = I3MEGAS
-printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN
-printer_settings_id = Anycubic i3 Mega S
-printer_technology = FFF
-printer_variant = 0.4
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-remaining_times = 1
-resolution = 0
-retract_before_travel = 1.5
-retract_before_wipe = 60%
-retract_layer_change = 1
-retract_length = 6
-retract_length_toolchange = 10
-retract_lift = 0.075
-retract_lift_above = 0
-retract_lift_below = 204
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-seam_position = nearest
-silent_mode = 0
-single_extruder_multi_material = 0
-single_extruder_multi_material_priming = 1
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-slice_closing_radius = 0.049
-slicing_mode = regular
-slowdown_below_layer_time = 20
-small_perimeter_speed = 25
-solid_infill_acceleration = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-staggered_inner_seams = 0
-standby_temperature_delta = -5
-start_filament_gcode = "; Filament gcode\n"
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.1
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 80%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 50
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-support_tree_angle = 40
-support_tree_angle_slow = 25
-support_tree_branch_diameter = 2
-support_tree_branch_diameter_angle = 5
-support_tree_branch_diameter_double_wall = 3
-support_tree_branch_distance = 1
-support_tree_tip_diameter = 0.8
-support_tree_top_rate = 15%
-temperature = 210
-template_custom_gcode = 
-thick_bridges = 1
-thin_walls = 0
-thumbnails = 16x16,220x124
-thumbnails_format = PNG
-toolchange_gcode = 
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
-top_solid_infill_acceleration = 0
-top_solid_infill_speed = 40
-top_solid_layers = 7
-top_solid_min_thickness = 0.7
-travel_acceleration = 0
-travel_lift_before_obstacle = 0
-travel_max_lift = 0
-travel_ramping_lift = 0
-travel_slope = 0
-travel_speed = 180
-travel_speed_z = 0
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe = 1
-wipe_into_infill = 0
-wipe_into_objects = 0
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_cone_angle = 0
-wipe_tower_extra_spacing = 100%
-wipe_tower_extruder = 0
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-wiping_volumes_extruders = 70,70
-wiping_volumes_matrix = 0
-xy_size_compensation = 0
-z_offset = 0