diff options
Diffstat (limited to 'mech/prusa-slicer/anycubic_i3_mega_s.ini')
| -rw-r--r-- | mech/prusa-slicer/anycubic_i3_mega_s.ini | 331 |
1 files changed, 0 insertions, 331 deletions
diff --git a/mech/prusa-slicer/anycubic_i3_mega_s.ini b/mech/prusa-slicer/anycubic_i3_mega_s.ini deleted file mode 100644 index 10abab4..0000000 --- a/mech/prusa-slicer/anycubic_i3_mega_s.ini +++ /dev/null @@ -1,331 +0,0 @@ -# generated by PrusaSlicer 2.7.1 on 2023-12-23 at 18:21:27 UTC -arc_fitting = disabled -autoemit_temperature_commands = 1 -avoid_crossing_curled_overhangs = 0 -avoid_crossing_perimeters = 0 -avoid_crossing_perimeters_max_detour = 0 -bed_custom_model = -bed_custom_texture = -bed_shape = 0x0,210x0,210x210,0x210 -bed_temperature = 60 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z] -between_objects_gcode = -binary_gcode = 0 -bottom_fill_pattern = monotonic -bottom_solid_layers = 5 -bottom_solid_min_thickness = 0.5 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_fan_speed = 100 -bridge_flow_ratio = 1 -bridge_speed = 25 -brim_separation = 0 -brim_type = outer_only -brim_width = 0 -color_change_gcode = M600 -colorprint_heights = -compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ and nozzle_diameter[0]==0.4";"printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/" -complete_objects = 0 -cooling = 1 -cooling_tube_length = 5 -cooling_tube_retraction = 91.5 -default_acceleration = 1000 -default_filament_profile = "Generic PLA @MEGA" -default_print_profile = 0.15mm QUALITY @MEGA -deretract_speed = 50 -disable_fan_first_layers = 1 -dont_support_bridges = 1 -draft_shield = disabled -duplicate_distance = 6 -elefant_foot_compensation = 0 -enable_dynamic_fan_speeds = 0 -enable_dynamic_overhang_speeds = 0 -end_filament_gcode = "; Filament-specific end gcode" -end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors -external_perimeter_acceleration = 0 -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_loading_move = -2 -extra_perimeters = 1 -extra_perimeters_on_overhangs = 0 -extruder_clearance_height = 35 -extruder_clearance_radius = 60 -extruder_colour = #808080 -extruder_offset = 0x0 -extrusion_axis = E -extrusion_multiplier = 1 -extrusion_width = 0.45 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF3232 -filament_cooling_final_speed = 3.4 -filament_cooling_initial_speed = 2.2 -filament_cooling_moves = 4 -filament_cost = 25.4 -filament_density = 1.24 -filament_deretract_speed = nil -filament_diameter = 1.75 -filament_load_time = 0 -filament_loading_speed = 28 -filament_loading_speed_start = 3 -filament_max_volumetric_speed = 10 -filament_minimal_purge_on_wipe_tower = 15 -filament_multitool_ramming = 0 -filament_multitool_ramming_flow = 10 -filament_multitool_ramming_volume = 10 -filament_notes = "" -filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" -filament_retract_before_travel = nil -filament_retract_before_wipe = nil -filament_retract_layer_change = nil -filament_retract_length = nil -filament_retract_length_toolchange = nil -filament_retract_lift = nil -filament_retract_lift_above = nil -filament_retract_lift_below = nil -filament_retract_restart_extra = nil -filament_retract_restart_extra_toolchange = nil -filament_retract_speed = nil -filament_settings_id = "Generic PLA @MEGA" -filament_soluble = 0 -filament_spool_weight = 0 -filament_toolchange_delay = 0 -filament_travel_lift_before_obstacle = nil -filament_travel_max_lift = nil -filament_travel_ramping_lift = nil -filament_travel_slope = nil -filament_type = PLA -filament_unload_time = 0 -filament_unloading_speed = 90 -filament_unloading_speed_start = 100 -filament_vendor = Generic -filament_wipe = nil -fill_angle = 45 -fill_density = 15% -fill_pattern = gyroid -first_layer_acceleration = 800 -first_layer_acceleration_over_raft = 0 -first_layer_bed_temperature = 65 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 20 -first_layer_speed_over_raft = 30 -first_layer_temperature = 215 -full_fan_speed_layer = 0 -fuzzy_skin = none -fuzzy_skin_point_dist = 0.8 -fuzzy_skin_thickness = 0.3 -gap_fill_enabled = 1 -gap_fill_speed = 40 -gcode_comments = 0 -gcode_flavor = marlin -gcode_label_objects = octoprint -gcode_resolution = 0.0125 -gcode_substitutions = -high_current_on_filament_swap = 0 -host_type = prusalink -idle_temperature = nil -infill_acceleration = 1000 -infill_anchor = 2.5 -infill_anchor_max = 12 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -ironing = 0 -ironing_flowrate = 15% -ironing_spacing = 0.1 -ironing_speed = 15 -ironing_type = top -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] -layer_height = 0.15 -machine_limits_usage = time_estimate_only -machine_max_acceleration_e = 10000 -machine_max_acceleration_extruding = 1250 -machine_max_acceleration_retracting = 1250 -machine_max_acceleration_travel = 1500,1250 -machine_max_acceleration_x = 3000 -machine_max_acceleration_y = 2000 -machine_max_acceleration_z = 60 -machine_max_feedrate_e = 30 -machine_max_feedrate_x = 500 -machine_max_feedrate_y = 500 -machine_max_feedrate_z = 8 -machine_max_jerk_e = 5 -machine_max_jerk_x = 10 -machine_max_jerk_y = 10 -machine_max_jerk_z = 0.4 -machine_min_extruding_rate = 0,0 -machine_min_travel_rate = 0,0 -max_fan_speed = 100 -max_layer_height = 0.36 -max_print_height = 205 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_bead_width = 85% -min_fan_speed = 100 -min_feature_size = 25% -min_layer_height = 0.07 -min_print_speed = 15 -min_skirt_length = 4 -mmu_segmented_region_interlocking_depth = 0 -mmu_segmented_region_max_width = 0 -notes = -nozzle_diameter = 0.4 -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode -overhang_fan_speed_0 = 0 -overhang_fan_speed_1 = 0 -overhang_fan_speed_2 = 0 -overhang_fan_speed_3 = 0 -overhang_speed_0 = 15 -overhang_speed_1 = 15 -overhang_speed_2 = 20 -overhang_speed_3 = 25 -overhangs = 1 -parking_pos_retraction = 92 -pause_print_gcode = M601 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_generator = arachne -perimeter_speed = 50 -perimeters = 2 -physical_printer_settings_id = -post_process = -print_host = -print_settings_id = 0.15mm QUALITY @MEGA -printer_model = I3MEGAS -printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN -printer_settings_id = Anycubic i3 Mega S -printer_technology = FFF -printer_variant = 0.4 -printer_vendor = -printhost_apikey = -printhost_cafile = -raft_contact_distance = 0.1 -raft_expansion = 1.5 -raft_first_layer_density = 90% -raft_first_layer_expansion = 3 -raft_layers = 0 -remaining_times = 1 -resolution = 0 -retract_before_travel = 1.5 -retract_before_wipe = 60% -retract_layer_change = 1 -retract_length = 6 -retract_length_toolchange = 10 -retract_lift = 0.075 -retract_lift_above = 0 -retract_lift_below = 204 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 -retract_speed = 40 -seam_position = nearest -silent_mode = 0 -single_extruder_multi_material = 0 -single_extruder_multi_material_priming = 1 -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -slice_closing_radius = 0.049 -slicing_mode = regular -slowdown_below_layer_time = 20 -small_perimeter_speed = 25 -solid_infill_acceleration = 0 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 50 -spiral_vase = 0 -staggered_inner_seams = 0 -standby_temperature_delta = -5 -start_filament_gcode = "; Filament gcode\n" -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0 -support_material = 0 -support_material_angle = 0 -support_material_auto = 1 -support_material_bottom_contact_distance = 0 -support_material_bottom_interface_layers = -1 -support_material_buildplate_only = 0 -support_material_closing_radius = 2 -support_material_contact_distance = 0.1 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_pattern = rectilinear -support_material_interface_spacing = 0.2 -support_material_interface_speed = 80% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_style = grid -support_material_synchronize_layers = 0 -support_material_threshold = 50 -support_material_with_sheath = 1 -support_material_xy_spacing = 60% -support_tree_angle = 40 -support_tree_angle_slow = 25 -support_tree_branch_diameter = 2 -support_tree_branch_diameter_angle = 5 -support_tree_branch_diameter_double_wall = 3 -support_tree_branch_distance = 1 -support_tree_tip_diameter = 0.8 -support_tree_top_rate = 15% -temperature = 210 -template_custom_gcode = -thick_bridges = 1 -thin_walls = 0 -thumbnails = 16x16,220x124 -thumbnails_format = PNG -toolchange_gcode = -top_fill_pattern = monotonic -top_infill_extrusion_width = 0.4 -top_solid_infill_acceleration = 0 -top_solid_infill_speed = 40 -top_solid_layers = 7 -top_solid_min_thickness = 0.7 -travel_acceleration = 0 -travel_lift_before_obstacle = 0 -travel_max_lift = 0 -travel_ramping_lift = 0 -travel_slope = 0 -travel_speed = 180 -travel_speed_z = 0 -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 1 -wall_distribution_count = 1 -wall_transition_angle = 10 -wall_transition_filter_deviation = 25% -wall_transition_length = 100% -wipe = 1 -wipe_into_infill = 0 -wipe_into_objects = 0 -wipe_tower = 0 -wipe_tower_bridging = 10 -wipe_tower_brim_width = 2 -wipe_tower_cone_angle = 0 -wipe_tower_extra_spacing = 100% -wipe_tower_extruder = 0 -wipe_tower_no_sparse_layers = 0 -wipe_tower_rotation_angle = 0 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -wiping_volumes_extruders = 70,70 -wiping_volumes_matrix = 0 -xy_size_compensation = 0 -z_offset = 0 |