From f333e4282cb6b5ff1c49d3ea68b0af7422a9548e Mon Sep 17 00:00:00 2001
From: xengineering <me@xengineering.eu>
Date: Fri, 22 Dec 2023 22:08:57 +0100
Subject: mech: pcb_case: Separate bolt and nut to own files

Having named files for these parts makes them more visible inside the
project. They used to be in the `common.scad` file which does not
explain anything by its name.
---
 mech/pcb_case/bolt.scad   | 8 ++++++++
 mech/pcb_case/common.scad | 7 ++-----
 mech/pcb_case/nut.scad    | 9 +++++++++
 3 files changed, 19 insertions(+), 5 deletions(-)
 create mode 100644 mech/pcb_case/bolt.scad
 create mode 100644 mech/pcb_case/nut.scad

diff --git a/mech/pcb_case/bolt.scad b/mech/pcb_case/bolt.scad
new file mode 100644
index 0000000..0a2f8a0
--- /dev/null
+++ b/mech/pcb_case/bolt.scad
@@ -0,0 +1,8 @@
+bolt_d = 3;
+bolt_r = bolt_d / 2;
+
+module bolt() {
+	cylinder(d=bolt_d,h=5);  // TODO height is not considered at the moment
+}
+
+bolt();
diff --git a/mech/pcb_case/common.scad b/mech/pcb_case/common.scad
index 0f79e16..dfcf909 100644
--- a/mech/pcb_case/common.scad
+++ b/mech/pcb_case/common.scad
@@ -1,8 +1,5 @@
-nut_h = 3;
-nut_d = 4.15;
-nut_r = nut_d / 2;
-bolt_d = 3;
-bolt_r = bolt_d / 2;
+use <bolt.scad>
+use <nut.scad>
 
 module rounded_cube(dim, radius) {
 	range_y = [radius, dim[1]-radius];
diff --git a/mech/pcb_case/nut.scad b/mech/pcb_case/nut.scad
new file mode 100644
index 0000000..bfd5b3d
--- /dev/null
+++ b/mech/pcb_case/nut.scad
@@ -0,0 +1,9 @@
+nut_h = 3;
+nut_d = 4.15;
+nut_r = nut_d / 2;
+
+module nut() {
+	cylinder(d=nut_d,h=nut_h);
+}
+
+nut();
-- 
cgit v1.2.3-70-g09d2