blob: d24eab5ba6e30fd241c0c0156730a79063d9792d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
|
---------------------
ledcontrol / firmware
---------------------
This folder contains the firmware for the ledcontrol project. It assumes a
STM32F103C8T6 microcontroller.
Usage
-----
Install the necessary software. For Arch Linux this works like this:
sudo pacman -S \
base-devel \
arm-none-eabi-binutils \
arm-none-eabi-gcc \
arm-none-eabi-gdb \
arm-none-eabi-newlib
Clone this repository with all Git submodules:
git clone --recurse-submodules https://cgit.xengineering.eu/ledcontrol
Enter the repository and build the software:
cd ledcontrol/firmware
make
Connect your STM32F103C8T6 with an STLINK V2 debugger and flash the firmware:
./ocd.sh
# switch to a second terminal in the same folder
./gdb.sh build/ledcontrol.elf
load
run
# CTRL + C will stop the execution
# leave GDB with CTRL + D
Mention that you do not have to quit GDB to upload new compiled firmware. Just
call `load` and `run` again.
External References
-------------------
- tutorial about C programs on bare-metal ARM chips:
https://jacobmossberg.se/posts/2018/08/11/run-c-program-bare-metal-on-arm-cortex-m3.html
- tutorial about STM32 programming with libopencm3:
https://www.rhye.org/post/stm32-with-opencm3-0-compiling-and-uploading/
- PWM example from the libopencm3 project:
https://github.com/libopencm3/libopencm3-examples/blob/master/examples/stm32/f1/obldc/pwmleds/pwmleds.c
|
