1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
|
// vim: shiftwidth=4 tabstop=4 noexpandtab
/*
ledcontrol firmware
Copyright (C) 2021 xengineering
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
Contact: me@xengineering.eu
*/
#include <libopencm3/stm32/rcc.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/stm32/timer.h>
#include <libopencm3/cm3/nvic.h>
static void clock_init(void);
static void gpio_init(void);
static void nvic_init(void);
static void timer_init(void);
void tim2_isr(void);
int main(void)
{
clock_init();
gpio_init();
nvic_init();
timer_init();
while(1); // wait forever
}
static void clock_init(void)
{
// set sysclk to 72 MHz via external 8 MHz crystal
rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSE8_72MHZ]);
// enable clocks for GPIO ports B and C
rcc_periph_clock_enable(RCC_GPIOB);
rcc_periph_clock_enable(RCC_GPIOC);
// enable clock for timer 2 (blinking)
rcc_periph_clock_enable(RCC_TIM2);
// enable clock for timer 3 (PWM)
rcc_periph_clock_enable(RCC_TIM3);
// enable clock for alternate functions
rcc_periph_clock_enable(RCC_AFIO); // TODO is this necessary?
}
static void gpio_init(void)
{
// init PC13 onboard LED for blinking
gpio_set_mode(
GPIOC,
GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL,
GPIO13
);
gpio_clear(GPIOC, GPIO13); // set initial value to 'on'
// setup PB0 (connected to TIM3_CH3) for PWM
gpio_set_mode(
GPIOB,
GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL,
GPIO_TIM3_CH3
);
}
static void nvic_init(void)
{
// enable timer 2 interrupt and set priority
nvic_enable_irq(NVIC_TIM2_IRQ);
nvic_set_priority(NVIC_TIM2_IRQ, 1);
}
static void timer_init(void)
{
// setup timer 2 for blinking
timer_set_counter(TIM2, 1);
timer_set_prescaler(TIM2, 1440);
timer_set_period(TIM2, 50);
// enable timer / counter 2 and the corresponding interrupt for blinking
timer_enable_irq(TIM2, TIM_DIER_UIE);
timer_enable_counter(TIM2);
/*
enable timer / counter 3
*/
/* Clock division and mode */
TIM3_CR1 = TIM_CR1_CKD_CK_INT | TIM_CR1_CMS_EDGE;
/* Period */
TIM3_ARR = 65535;
/* Prescaler */
TIM3_PSC = 0;
TIM3_EGR = TIM_EGR_UG;
/* ---- */
/* Output compare 3 mode and preload */
TIM3_CCMR2 |= TIM_CCMR2_OC3M_PWM1 | TIM_CCMR2_OC3PE;
/* Polarity and state */
TIM3_CCER |= TIM_CCER_CC3P | TIM_CCER_CC3E;
//TIM3_CCER |= TIM_CCER_CC3E;
/* Capture compare value */
TIM3_CCR3 = 30000;
/* ---- */
/* ARR reload enable */
TIM3_CR1 |= TIM_CR1_ARPE;
/* Counter enable */
TIM3_CR1 |= TIM_CR1_CEN;
}
void tim2_isr(void)
{
// PWM handling
static uint32_t pwm_value;
if (pwm_value == 0) {
pwm_value = 65535;
}
else {
pwm_value -= 20;
}
TIM3_CCR3 = pwm_value;
// toggle blink LED
static uint32_t counter;
counter += 1;
if (counter > 500) {
gpio_toggle(GPIOC, GPIO13);
counter = 0;
}
// clear interrrupt flag
TIM_SR(TIM2) &= ~TIM_SR_UIF;
}
|
