mech: Add slicer config anycubic_i3_mega_s.ini

Adding a slicer configuration is important to have reproducable printing
results. While a default configuration should be sufficient to print the
part roughly it is especially important for correct tolerances that the
printer settings are exactly the same.

Starting with the i3 Mega S provides only configuration for one 3D
printer. Nevertheless additional configurations for other printers can
be added easily.

1 files changed, 331 insertions, 0 deletions

diff --git a/mech/prusa-slicer/anycubic_i3_mega_s.ini b/mech/prusa-slicer/anycubic_i3_mega_s.ini
new file mode 100644
index 0000000..10abab4
--- /dev/null
+++ b/mech/prusa-slicer/anycubic_i3_mega_s.ini
@@ -0,0 +1,331 @@
+# generated by PrusaSlicer 2.7.1 on 2023-12-23 at 18:21:27 UTC
+arc_fitting = disabled
+autoemit_temperature_commands = 1
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,210x0,210x210,0x210
+bed_temperature = 60
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]
+between_objects_gcode = 
+binary_gcode = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 25
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+color_change_gcode = M600
+colorprint_heights = 
+compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/  and nozzle_diameter[0]==0.4";"printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/"
+complete_objects = 0
+cooling = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_acceleration = 1000
+default_filament_profile = "Generic PLA @MEGA"
+default_print_profile = 0.15mm QUALITY @MEGA
+deretract_speed = 50
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+draft_shield = disabled
+duplicate_distance = 6
+elefant_foot_compensation = 0
+enable_dynamic_fan_speeds = 0
+enable_dynamic_overhang_speeds = 0
+end_filament_gcode = "; Filament-specific end gcode"
+end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors
+external_perimeter_acceleration = 0
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_loading_move = -2
+extra_perimeters = 1
+extra_perimeters_on_overhangs = 0
+extruder_clearance_height = 35
+extruder_clearance_radius = 60
+extruder_colour = #808080
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0.45
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 25.4
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 10
+filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_length_toolchange = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
+filament_retract_speed = nil
+filament_settings_id = "Generic PLA @MEGA"
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_travel_lift_before_obstacle = nil
+filament_travel_max_lift = nil
+filament_travel_ramping_lift = nil
+filament_travel_slope = nil
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Generic
+filament_wipe = nil
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
+first_layer_bed_temperature = 65
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+first_layer_temperature = 215
+full_fan_speed_layer = 0
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_flavor = marlin
+gcode_label_objects = octoprint
+gcode_resolution = 0.0125
+gcode_substitutions = 
+high_current_on_filament_swap = 0
+host_type = prusalink
+idle_temperature = nil
+infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+layer_height = 0.15
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1250
+machine_max_acceleration_retracting = 1250
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 3000
+machine_max_acceleration_y = 2000
+machine_max_acceleration_z = 60
+machine_max_feedrate_e = 30
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 8
+machine_max_jerk_e = 5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_fan_speed = 100
+max_layer_height = 0.36
+max_print_height = 205
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_bead_width = 85%
+min_fan_speed = 100
+min_feature_size = 25%
+min_layer_height = 0.07
+min_print_speed = 15
+min_skirt_length = 4
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhang_fan_speed_0 = 0
+overhang_fan_speed_1 = 0
+overhang_fan_speed_2 = 0
+overhang_fan_speed_3 = 0
+overhang_speed_0 = 15
+overhang_speed_1 = 15
+overhang_speed_2 = 20
+overhang_speed_3 = 25
+overhangs = 1
+parking_pos_retraction = 92
+pause_print_gcode = M601
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_generator = arachne
+perimeter_speed = 50
+perimeters = 2
+physical_printer_settings_id = 
+post_process = 
+print_host = 
+print_settings_id = 0.15mm QUALITY @MEGA
+printer_model = I3MEGAS
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN
+printer_settings_id = Anycubic i3 Mega S
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+remaining_times = 1
+resolution = 0
+retract_before_travel = 1.5
+retract_before_wipe = 60%
+retract_layer_change = 1
+retract_length = 6
+retract_length_toolchange = 10
+retract_lift = 0.075
+retract_lift_above = 0
+retract_lift_below = 204
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+seam_position = nearest
+silent_mode = 0
+single_extruder_multi_material = 0
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+slowdown_below_layer_time = 20
+small_perimeter_speed = 25
+solid_infill_acceleration = 0
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 50
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+start_filament_gcode = "; Filament gcode\n"
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 80%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 50
+support_material_with_sheath = 1
+support_material_xy_spacing = 60%
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 15%
+temperature = 210
+template_custom_gcode = 
+thick_bridges = 1
+thin_walls = 0
+thumbnails = 16x16,220x124
+thumbnails_format = PNG
+toolchange_gcode = 
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_acceleration = 0
+top_solid_infill_speed = 40
+top_solid_layers = 7
+top_solid_min_thickness = 0.7
+travel_acceleration = 0
+travel_lift_before_obstacle = 0
+travel_max_lift = 0
+travel_ramping_lift = 0
+travel_slope = 0
+travel_speed = 180
+travel_speed_z = 0
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe = 1
+wipe_into_infill = 0
+wipe_into_objects = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+wiping_volumes_extruders = 70,70
+wiping_volumes_matrix = 0
+xy_size_compensation = 0
+z_offset = 0