diff options
Diffstat (limited to 'case/prusa-slicer/anycubic_i3_mega_s.ini')
| -rw-r--r-- | case/prusa-slicer/anycubic_i3_mega_s.ini | 331 |
1 files changed, 331 insertions, 0 deletions
diff --git a/case/prusa-slicer/anycubic_i3_mega_s.ini b/case/prusa-slicer/anycubic_i3_mega_s.ini new file mode 100644 index 0000000..10abab4 --- /dev/null +++ b/case/prusa-slicer/anycubic_i3_mega_s.ini @@ -0,0 +1,331 @@ +# generated by PrusaSlicer 2.7.1 on 2023-12-23 at 18:21:27 UTC +arc_fitting = disabled +autoemit_temperature_commands = 1 +avoid_crossing_curled_overhangs = 0 +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,210x0,210x210,0x210 +bed_temperature = 60 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z] +between_objects_gcode = +binary_gcode = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 5 +bottom_solid_min_thickness = 0.5 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_fan_speed = 100 +bridge_flow_ratio = 1 +bridge_speed = 25 +brim_separation = 0 +brim_type = outer_only +brim_width = 0 +color_change_gcode = M600 +colorprint_heights = +compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ and nozzle_diameter[0]==0.4";"printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/" +complete_objects = 0 +cooling = 1 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_acceleration = 1000 +default_filament_profile = "Generic PLA @MEGA" +default_print_profile = 0.15mm QUALITY @MEGA +deretract_speed = 50 +disable_fan_first_layers = 1 +dont_support_bridges = 1 +draft_shield = disabled +duplicate_distance = 6 +elefant_foot_compensation = 0 +enable_dynamic_fan_speeds = 0 +enable_dynamic_overhang_speeds = 0 +end_filament_gcode = "; Filament-specific end gcode" +end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors +external_perimeter_acceleration = 0 +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_loading_move = -2 +extra_perimeters = 1 +extra_perimeters_on_overhangs = 0 +extruder_clearance_height = 35 +extruder_clearance_radius = 60 +extruder_colour = #808080 +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 1 +extrusion_width = 0.45 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 25.4 +filament_density = 1.24 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 10 +filament_minimal_purge_on_wipe_tower = 15 +filament_multitool_ramming = 0 +filament_multitool_ramming_flow = 10 +filament_multitool_ramming_volume = 10 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_length_toolchange = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_restart_extra_toolchange = nil +filament_retract_speed = nil +filament_settings_id = "Generic PLA @MEGA" +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_travel_lift_before_obstacle = nil +filament_travel_max_lift = nil +filament_travel_ramping_lift = nil +filament_travel_slope = nil +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = Generic +filament_wipe = nil +fill_angle = 45 +fill_density = 15% +fill_pattern = gyroid +first_layer_acceleration = 800 +first_layer_acceleration_over_raft = 0 +first_layer_bed_temperature = 65 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +first_layer_temperature = 215 +full_fan_speed_layer = 0 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 40 +gcode_comments = 0 +gcode_flavor = marlin +gcode_label_objects = octoprint +gcode_resolution = 0.0125 +gcode_substitutions = +high_current_on_filament_swap = 0 +host_type = prusalink +idle_temperature = nil +infill_acceleration = 1000 +infill_anchor = 2.5 +infill_anchor_max = 12 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +layer_height = 0.15 +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 1250 +machine_max_acceleration_retracting = 1250 +machine_max_acceleration_travel = 1500,1250 +machine_max_acceleration_x = 3000 +machine_max_acceleration_y = 2000 +machine_max_acceleration_z = 60 +machine_max_feedrate_e = 30 +machine_max_feedrate_x = 500 +machine_max_feedrate_y = 500 +machine_max_feedrate_z = 8 +machine_max_jerk_e = 5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_fan_speed = 100 +max_layer_height = 0.36 +max_print_height = 205 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_bead_width = 85% +min_fan_speed = 100 +min_feature_size = 25% +min_layer_height = 0.07 +min_print_speed = 15 +min_skirt_length = 4 +mmu_segmented_region_interlocking_depth = 0 +mmu_segmented_region_max_width = 0 +notes = +nozzle_diameter = 0.4 +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhang_fan_speed_0 = 0 +overhang_fan_speed_1 = 0 +overhang_fan_speed_2 = 0 +overhang_fan_speed_3 = 0 +overhang_speed_0 = 15 +overhang_speed_1 = 15 +overhang_speed_2 = 20 +overhang_speed_3 = 25 +overhangs = 1 +parking_pos_retraction = 92 +pause_print_gcode = M601 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_generator = arachne +perimeter_speed = 50 +perimeters = 2 +physical_printer_settings_id = +post_process = +print_host = +print_settings_id = 0.15mm QUALITY @MEGA +printer_model = I3MEGAS +printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN +printer_settings_id = Anycubic i3 Mega S +printer_technology = FFF +printer_variant = 0.4 +printer_vendor = +printhost_apikey = +printhost_cafile = +raft_contact_distance = 0.1 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +remaining_times = 1 +resolution = 0 +retract_before_travel = 1.5 +retract_before_wipe = 60% +retract_layer_change = 1 +retract_length = 6 +retract_length_toolchange = 10 +retract_lift = 0.075 +retract_lift_above = 0 +retract_lift_below = 204 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 40 +seam_position = nearest +silent_mode = 0 +single_extruder_multi_material = 0 +single_extruder_multi_material_priming = 1 +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +slice_closing_radius = 0.049 +slicing_mode = regular +slowdown_below_layer_time = 20 +small_perimeter_speed = 25 +solid_infill_acceleration = 0 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 50 +spiral_vase = 0 +staggered_inner_seams = 0 +standby_temperature_delta = -5 +start_filament_gcode = "; Filament gcode\n" +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = -1 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.1 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.2 +support_material_interface_speed = 80% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 50 +support_material_with_sheath = 1 +support_material_xy_spacing = 60% +support_tree_angle = 40 +support_tree_angle_slow = 25 +support_tree_branch_diameter = 2 +support_tree_branch_diameter_angle = 5 +support_tree_branch_diameter_double_wall = 3 +support_tree_branch_distance = 1 +support_tree_tip_diameter = 0.8 +support_tree_top_rate = 15% +temperature = 210 +template_custom_gcode = +thick_bridges = 1 +thin_walls = 0 +thumbnails = 16x16,220x124 +thumbnails_format = PNG +toolchange_gcode = +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.4 +top_solid_infill_acceleration = 0 +top_solid_infill_speed = 40 +top_solid_layers = 7 +top_solid_min_thickness = 0.7 +travel_acceleration = 0 +travel_lift_before_obstacle = 0 +travel_max_lift = 0 +travel_ramping_lift = 0 +travel_slope = 0 +travel_speed = 180 +travel_speed_z = 0 +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wall_distribution_count = 1 +wall_transition_angle = 10 +wall_transition_filter_deviation = 25% +wall_transition_length = 100% +wipe = 1 +wipe_into_infill = 0 +wipe_into_objects = 0 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_cone_angle = 0 +wipe_tower_extra_spacing = 100% +wipe_tower_extruder = 0 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +wiping_volumes_extruders = 70,70 +wiping_volumes_matrix = 0 +xy_size_compensation = 0 +z_offset = 0 |